Oil and petroleum separator

Once  suspended solids are removed in sand separator, effluents  are transferred to oil and petroleum  separator for further treatment. The oil and petroleum  separator is the second stage of treatment facilities.
Oil and petroleum separator
Oil and petroleum separator
fon
Detailed description
Design and operating concept

Purifies surface wastewater from sand, coarse suspended solids, and dissolved petroleum products. It is installed after preliminary mechanical treatment, before discharge into the municipal sewerage system. It is also possible to use as a mechanical treatment facility, before the sorption filters. The body of the unit is made of reinforced fiberglass, which excludes deformation under the loads of soil and groundwater. Increased strength of the product is provided by the method of cross-winding.

Purification technology

Wastewater through the supply pipeline enters the sediment zone, where the flow velocity is averaged and heavy mineral impurities fall to the bottom of the unit.

Wastewater purification is achieved through the installed coalescing module, which enlarges the particles of petroleum products and ensures their floating to the surface.

The clarified wastewater is then discharged to the outlet branch pipe.

The sludge formed at the bottom of the sedimentation tank is periodically removed by the sludge removal machine through the service hole.

Upon request it is possible to equip the unit with sensors-signalizers of sand and oil products level for their timely pumping out. Recommended capacity is from 1 to 250 l/s.


Installation

Prior oil/petroleum separator installation, an excavation pit should be arranged: excavation works, water level reduction, sheet piling of the excavation walls (if necessary) and a reinforced concrete plate to which the oil/petroleum separator is fixed with synthetic bands (or bands of corrosion-resistant steel on the rubber seal) to prevent floating up under the groundwater pressure. After the oil separator is fixed, backfilling is performed, layer by layer with compaction by a vibrating plate, simultaneously on both sides of the separator body housing. After connecting the input and output branch pipes of the oil and petroleum separator to the collector of the rainwater treatment system, the service well (maintenance well) is connected and the secondary backfilling is performed. For more details please refer to the operation manual.

Maintenance

It is recommended that an oil/petroleum separator manufactured by NTT-Peresvet is maintained at least once a year, at the end of the working season. Maintenance of the oil separator includes pumping out the water containing accumulated oil products and sludge. If the oil/petroleum separator is equipped with sensors, they should be removed from the housing during pumping out to avoid breakage of the sensors, clean the sensors from contamination and test their operability. The coalescence modules of the oil and petroleum separator are auto-cleaning and do not require replacement or regeneration - cleaning is performed using non-expendable materials. After pumping out accumulated oil products, sludge and installing sensors in place, the oil separator must be filled with water up to the height (level) of the output branch pipe.

 

Properties

Q - flow rate: 1-250 l/s

D - housing diameter: 1000-4000 mm

L - housing length: 2500-10600 mm

A - input pipe height: 900-3300 mm

B - output pipe height: 800-3000 mm

N - input/output pipe diameter: 100-700 mm

H - track laying depth: according to the customer's project


Or leave your contact information for consultation

Or leave your contact details for consultation
Leave a request
Read more
Fill out the application form for equipment in «Innovative Pipe Solutions»
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Place your order

Укажите ваш email для получения файла